F2001標準箔簡介：
標準箔0-1000um（25，50，75，125，175，250，500，750um）。
Paint Test Equipment Calibration Shims are necessary for the day to day calibration checking of Coating Thickness Meters.
Each individual foil is measured in the centre and the value is written on the label and is supplied in a strong robust wallet which allows protection of each foil from dirt, grease etc.
Special Range Calibration Foils can Be supplied, made up of any 8 values as listed:
12μm , 50μm, 25μm , 75μm , 100μm , 125μm , 150μm , 175μm , 190μm , 200μm , 225μm , 250μm , 275μm , 300μm , 350μm , 375μm , 500μm , 625μm , 750μm , 1000μm , 1250μm , 1500μm , 2000μm , 3000μm , 5mm, 9.5mm and 15mm (also available in mils). PLEASE CONTACT US FOR THIS REQUIREMENT.
Note all values shown are nominal values.
Calibration certificates are available for each foil set showing traceability of measurement to UKAS.
Ferrous and Non-Ferrous Zero Disks (Plates) can also be supplied.